celeryBook a demo
Network · 6 of 6

Troubleshooting network issues

Work through these before you call. Most faults that look like Celery are the network or the hardware, and checking them first gets you trading again faster.

What you'll need
  • Access to the router, switches and printers
  • A spare network cable and printer power supply, if you have them

1. Start with the cables

Check every cable is firmly plugged in at both ends and shows no damage. Most intermittent faults are a cable that has been knocked loose.

2. Isolate a failing printer

If one printer fails on and off, swap it with another if you have one, and swap all three parts: the printer, its power supply and its network cable. Any one of them may be faulty. If the fault moves with a part, that part needs replacing.

3. Restart in order

If several devices are affected, restart them in this order: router, switches, printers, the master iPad, then the waiter iPads. Each one needs the one before it to be ready.

Still stuck? Open a support ticket with your outlet name, what you checked and a photo.

If something goes wrong

Usually a printer without a fixed address, or a loose cable. Give it a DHCP reservation and reseat its cable.
Wire it with an Ethernet adapter, keep it charging, and give the adapter a reservation.
Check the master iPad is awake: set Auto-Lock to Never on every iPad and keep the Celery app open. Then check every device is on the same staff network, never the guest Wi-Fi.
Check the router has power and its internet light is on, then call your network provider. Celery cannot fix a network outage.
Still stuck?Open a support ticket