celeryBook a demo
Network · 5 of 6

Setting up DHCP reservations

A DHCP reservation tells your router to give a device the same address every time. Celery finds printers and the master iPad by address, so these must never change.

What you'll need
  • Admin access to your router, or your network provider
  • The hardware (MAC) address of each printer and of the master iPad's adapter

1. Find each device's hardware address

Every network device has a hardware address, written as six pairs of letters and numbers.

Where to find it
DeviceWhere to find it
Network printerPrint a self-test page: the method varies by model, so check the printer manual
Master iPad on EthernetSettings, Ethernet: the adapter's hardware address
iPad on Wi-FiSettings, Wi-Fi, tap the network: turn Private Wi-Fi Address off first

2. Reserve the addresses

In the router admin page, open the DHCP or LAN settings and add a reservation for each device: its hardware address and the address it should always get.

Pick addresses outside the router's automatic range, so no other device can be handed the same one.

Restart each device so it picks up its reserved address, then print a test page.

Many routers are managed by the provider. If you do not have admin access, send this page to your provider and ask them to set the reservations.

If something goes wrong

It has no reservation, so the router handed it a new address. Reserve its address and restart it.
Still stuck?Open a support ticket